Suppliers: CyberPower VA Rating: 1001-2000 VA Watts: 501-1000 Watts Outlets: 8
||Intelligent LCD Series GreenPower UPS
|Input Voltage Range
||90 - 140 VAC
||57 - 63 Hz
||120Vac +/- 5%
||4 x 5-15R Battery/Surge Protected
4 x 5-15R Surge Protected
|Battery Run Time
||Entry-level PC with 19" LCD (150W) - 30 min.
Midrange PC with 19" LCD (300W) - 14 min.
Performance PC with 19" LCD (500W) - 7 min.
|Battery Recharge Time
||1 x Serial DB9; 1 x USB 4-pin
||PowerPanel Power Management
||FCC DOC Class B, cUL, UL 1778
|Data Line Protection
||1 x RJ11/45 Combo (One-in/One-out)
1 x RG-6 Coax/Cable
|Surge Energy Rating
||4" x 9.75" x 13.25"
Intelligent LCD Diagnostic Display: The innovative
front panel LCD can be used to display detailed information on the UPS
status and current power conditions. The LCD displays 11 different
diagnostics: Input voltage level, Output voltage level, Automatic
voltage regulator, Runtime estimate, Load level, Power frequency, On
battery, Overload, Fault, Battery capacity, and Silent mode.
Voltage Regulation (AVR) - Incoming AC power is electronically
regulated for dips and spikes AVR takes this irregular AC power and
converts it into a consistent Sinewave so sensitive electronic
equipment can achieve its optimal performance.
EMI/RFI - Provides
shielding against electromagnetic interference & radio frequency
signals. Most commonly, this is used to prevent line noise or
“humming” that occurs over telephone lines or stereo
Transformer-spaced Outlets - Widely spaced outlets
allow you to conveniently add large transformer-based plugs without
compromising the utility of other outlets.
USB Connectivity - HID
compliant USB port enables full integration with built-in power
management and auto shutdown features of Windows, Linux and Mac OS X.
PE ™ Smart Management Software – In event of a power
outage, PowerPanel PE will not only save your open files and will also
“Hibernate” your PC to increase the run-time on the UPS
unit. PowerPanel is quickly and easily installed on any Windows-based
PC and is designed to utilize minimal system resources. Diagnostic
screens give immediate visuals of the UPS’s status, and also
include the following features: Silent operation mode, configurable
system notifications, automatic self tests, adjustable high/low voltage
warnings, event/data logging, and scheduled shutdowns.
LED Indicators - LED status lights indicate Power-On and wiring faults.
Audible Alarms - Audible tones identify when the unit is running off battery power, unit overloads and low battery.