The micro-OLED µOLED-160-G1 is a unique, compact, and cost effective
serial controlled display module using the latest Passive Matrix OLED
(PMOLED) technology with an embedded
GOLDELOX
graphics controller that delivers stand-alone functionality to any
project. The module is designed to operate under two different software
platforms; the
Serial Command platform or the
4DGL (4D Graphics Language) platform.
Serial Command Platform:
The serial command platform allows the µOLED-160-G1 module to be used
as slave device connected to an external host. The host can be any
controller such as a PIC, AVR, ARM, STAMP, etc. or even a PC where all
screen related functions are sent using a simple protocol via the
serial interface. Serial commands may comprise of a single byte or
multiple bytes of data depending on the command type. The serial
platform allows users to develop their application using their favorite
microcontroller and software development tools.
4DGL Platform:
4DGL is a graphics oriented language allowing the developer to write
applications in a high level language (syntax similar to popular
languages such as BASIC, C, Pascal, etc.) and run it directly on the
GOLDELOX processor embedded in the µOLED-160-G1 module. The rich set of
built in library functions and the high level syntax allows the user to
take complete control of all available hardware resources such as the
Serial Port, Graphics Display, micro-SD card, I/O pins, etc. This
eliminates the need for an external host micro-controller to drive the
µOLED-160-G1 module via serial commands. It provides the user complete
independence to quickly develop powerful applications.
Features:
- 160 x 128 pixel resolution
- 65K colors
- 1.7” diagonal (active area: 33.6x26.9mm)
- OLED requires no backlight with near 180° viewing angle
- Easy 5 pin interface to any host device: VCC, TX, RX, GND, RESET
- Voltage supply from 3.6V to 6.0V, current @ 40mA nominal when using a 5.0V supply
- Serial (0V to 3.3V) with auto-baud feature (300 to 256Kbps)
- Powered by the GOLDELOX processor
- 2 interfaces: Serial Command platform (factory default) or the 4DGL (4D Graphics Language) platform
- Onboard micro-SD (μSD) card socket for storing of icons, images, animations, etc. (64Mb to 2Gb)
- Three selectable font sizes (5x7, 8x8 and 8x12)
- Built in graphics commands such as: LINE, CIRCLE, RECTANGLE, TEXT, USER BITMAP, BACKGROUND COLOR, PUT PIXEL, IMAGE, etc.
Documents and Software:
